-- *****************************************************************************
-- Juniper-PPP-CONF
--
-- SNMP Agent Capabilities definitions for the PPP MIBs.
--
-- Copyright (c) 2001-2002 Unisphere Networks, Inc.
-- Copyright (c) 2002-2007 Juniper Networks, Inc.
-- All rights reserved.
-- *****************************************************************************Juniper-PPP-CONF DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-IDENTITYFROM SNMPv2-SMI
AGENT-CAPABILITIESFROM SNMPv2-CONF
juniAgents
FROM Juniper-Agents;juniPppAgent MODULE-IDENTITYLAST-UPDATED"200707121215Z"-- 12-Jul-07 08:15 AM EDTORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
E-mail: mib@Juniper.net"DESCRIPTION"The agent capabilities definitions for the point-to-point protocol
(PPP) component of the SNMP agent in the Juniper E-series family of
products."-- Revision HistoryREVISION"200707121215Z"-- 12-Jul-07 08:15 AM EDT - JUNOSe 7.3DESCRIPTION"Updated rsPppLcpGroup and rsPppMlPppGroup to add ignore magic number.
Updated rsPppLcpGroup and rsPppMlpppGroup."
REVISION"200510191626Z"-- 19-Oct-05 12:26 PM EDT - JUNOSe 7.2DESCRIPTION"Juniper-PPP-MIB:
Added new object to the multi-link group."REVISION"200410012141Z"-- 01-Oct-04 05:41 PM EDT - JUNOSe 6.0DESCRIPTION"Updated the rsPppSummary table"REVISION"200311031832Z"-- 03-Nov-03 01:32 PM EST - JUNOSe 5.3DESCRIPTION"Juniper-PPP-MIB:
Added new objects to the multi-link group."REVISION"200309242011Z"-- 24-Sep-03 04:11 PM EDT - JUNOSe 5.1DESCRIPTION"Juniper-PPP-MIB:
Added IPv6 support."REVISION"200301281547Z"-- 28-Jan-03 10:47 AM EST - JUNOSe 5.0DESCRIPTION"Juniper-PPP-MIB:
Replaced Unisphere names with Juniper names.
Added new objects to the multi-link group."REVISION"200208302036Z"-- 30-Aug-02 04:36 PM EDT - JUNOSe 4.1DESCRIPTION"Juniper-PPP-MIB:
Added new objects to the LCP and multi-link groups."REVISION"200205092103Z"-- 09-May-02 05:03 PM EDT - JUNOSe 4.0
DESCRIPTION"Juniper-PPP-MIB:
Added new objects to the LCP, IP and multi-link groups."REVISION"200205082025Z"-- 08-May-02 04:25 PM EDT - JUNOSe 3.3DESCRIPTION"Created separate capabilities for multi-link PPP."REVISION"200104101823Z"-- 10-Apr-01 02:23 PM EDT - JUNOSe 3.2DESCRIPTION"The initial release of this management information module."::={ juniAgents 32}-- *****************************************************************************
-- The inclusive PPP SNMP Agent Capabilities definitions
-- *****************************************************************************juniPppAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the PPP component of the JUNOSe SNMP agent. This version
of the PPP component was supported in JUNOSe 2.4 thru 3.2 system
releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the PPP application in JUNOSe.
These capabilities became obsolete when the multilink capabilities were
separated out."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.
-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup3,
juniPppIpGroup2,
juniPppOsiGroup2,
juniPppSessionGroup,
juniPppMlPppGroup,
juniPppSummaryGroup }::={ juniPppAgent 1}-- *****************************************************************************
-- The general PPP interface agent capabilities.
-- *****************************************************************************juniPppGeneralAgent OBJECT-IDENTITYSTATUScurrentDESCRIPTION"The registration group of agent capabilities for the general
functionality of the PPP application which provides management support
for basic (non-multi-link) PPP interfaces via SNMP."::={ juniPppAgent 2}juniPppGeneralAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the general PPP component of the JUNOSe SNMP agent. This
version of the PPP component was supported in JUNOSe 3.3 and subsequent
3.x system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe. These capabilities became obsolete when new LCP and IP objects
were added to the Juniper-PPP-MIB."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup3,
juniPppIpGroup2,
juniPppOsiGroup2,
juniPppSessionGroup,
juniPppSummaryBasicGroup }::={ juniPppGeneralAgent 1}juniPppGeneralAgentV2 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 2 of the general PPP component of the JUNOSe SNMP agent. This
version of the PPP component was supported in JUNOSe 4.0 system
releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe. These capabilities became obsolete when new LCP objects were
added to the Juniper-PPP-MIB."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup4,
juniPppIpGroup3,
juniPppOsiGroup2,
juniPppSessionGroup,
juniPppSummaryBasicGroup }::={ juniPppGeneralAgent 2}juniPppGeneralAgentV3 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 3 of the general PPP component of the JUNOSe SNMP agent. This
version of the PPP component was supported in JUNOSe 4.1 through 5.0
system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe. These capabilities became obsolete when IPv6 support was
added."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".
INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup5,
juniPppIpGroup3,
juniPppOsiGroup2,
juniPppSessionGroup,
juniPppSummaryBasicGroup }::={ juniPppGeneralAgent 3}juniPppGeneralAgentV4 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 4 of the general PPP component of the JUNOSe SNMP agent. This
version of the PPP component was supported in JUNOSe 5.1 and subsequent
5.x system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe. These capabilities became obsolete when new objects were
added."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup5,
juniPppIpGroup4,
juniPppOsiGroup2,
juniPppSessionGroup2,
juniPppSummaryBasicGroup2,
juniPppIpv6Group }::={ juniPppGeneralAgent 4}juniPppGeneralAgentV5 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 5 of the general PPP component of the JUNOSe SNMP agent. This
version of the PPP component is supported in JUNOSe 6.0 throught 7.2
system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe. These capabilities became obsolete when new objects were
added."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".
INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup5,
juniPppIpGroup4,
juniPppOsiGroup2,
juniPppSessionGroup2,
juniPppSummaryBasicGroup3,
juniPppIpv6Group }::={ juniPppGeneralAgent 5}juniPppGeneralAgentV6 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 6 of the general PPP component of the JUNOSe SNMP agent. This
version of the PPP component is supported in JUNOSe 7.3 and subsequent
system releases."STATUScurrentDESCRIPTION"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe."SUPPORTS PPP-LCP-MIB
-- The PPP-LCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppLinkStatusEntry,
pppLinkConfigEntry }SUPPORTS PPP-IP-NCP-MIB
-- The PPP-IP-NCP-MIB is based on SMIv1 and has no conformance groups.-- Therefore, capabilities are identified by OID subtree "groups".INCLUDES{
pppIpEntry,
pppIpConfigEntry }SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppLcpGroup7,
juniPppIpGroup4,
juniPppOsiGroup2,
juniPppSessionGroup2,
juniPppSummaryBasicGroup3,
juniPppIpv6Group }::={ juniPppGeneralAgent 6}-- *****************************************************************************
-- The multi-link PPP interface agent capabilities.
-- *****************************************************************************juniPppMultiLinkAgent OBJECT-IDENTITYSTATUScurrentDESCRIPTION"The registration group of agent capabilities for the multi-link
functionality of the PPP application which provides management support
for multi-link PPP interfaces via SNMP."::={ juniPppAgent 3}juniPppMultiLinkAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 3.3 and
subsequent 3.x system releases."STATUSobsoleteDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup,
juniPppSummaryLinkGroup,
juniPppSummaryNetworkGroup }::={ juniPppMultiLinkAgent 1}juniPppMultiLinkAgentV2 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 2 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 4.0 system
releases."STATUSobsoleteDESCRIPTION
"The MIBs supported by the SNMP agent for the basic PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB"SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup2,
juniPppSummaryLinkGroup,
juniPppSummaryNetworkGroup }::={ juniPppMultiLinkAgent 2}juniPppMultiLinkAgentV3 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 3 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 4.1 and
subsequent 4.x system releases."STATUSobsoleteDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB"SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup3,
juniPppSummaryLinkGroup,
juniPppSummaryNetworkGroup }::={ juniPppMultiLinkAgent 3}juniPppMultiLinkAgentV4 AGENT-CAPABILITIES
PRODUCT-RELEASE"Version 4 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 5.0 system
releases."STATUSobsoleteDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when IPv6 support was
added."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup4,
juniPppSummaryLinkGroup,
juniPppSummaryNetworkGroup }::={ juniPppMultiLinkAgent 4}juniPppMultiLinkAgentV5 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 5 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 5.1 and 5.2
system releases."STATUSobsoleteDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup4,
juniPppSummaryLinkGroup,
juniPppSummaryNetworkGroup2 }::={ juniPppMultiLinkAgent 5}juniPppMultiLinkAgentV6 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 6 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 5.1 and
subsequent 5.x system releases."STATUSobsoleteDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup5,
juniPppSummaryLinkGroup,
juniPppSummaryNetworkGroup2 }::={ juniPppMultiLinkAgent 6}juniPppMultiLinkAgentV7 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 7 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component is supported in JUNOSe 6.0 through
7.2 system releases."STATUSobsolete
DESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup5,
juniPppSummaryLinkGroup2,
juniPppSummaryNetworkGroup3 }::={ juniPppMultiLinkAgent 7}juniPppMultiLinkAgentV8 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 8 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component is supported in JUNOSe 7.2 system
releases."STATUSobsoleteDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe. These capabilities became obsolete when new multi-link objects
were added to the Juniper-PPP-MIB."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup6,
juniPppSummaryLinkGroup2,
juniPppSummaryNetworkGroup3 }::={ juniPppMultiLinkAgent 8}juniPppMultiLinkAgentV9 AGENT-CAPABILITIES
PRODUCT-RELEASE"Version 9 of the multi-link PPP component of the JUNOSe SNMP agent.
This version of the PPP component was supported in JUNOSe 7.3 and
subsequent system releases."STATUScurrentDESCRIPTION"The MIB groups supported by the SNMP agent for the PPP application in
JUNOSe."SUPPORTS Juniper-PPP-MIB
INCLUDES{
juniPppMlPppGroup8,
juniPppSummaryLinkGroup2,
juniPppSummaryNetworkGroup3 }::={ juniPppMultiLinkAgent 9}END